Installation was easy and straightforward. I did not use the provided cleaning wipes. I used my own alcohol pads to make sure oil, wax, and dirt was removed from the mounting surface. I also wiped the mounting surface with adhesion promoter to make sure that the adhesive would stick to the helmet properly. I followed Chin Mounts suggestion regarding using a hair dryer/heat gun to warm the surface of the adhesive pad prior to Installation as well as letting it cure for 24hrs before mounting the camera. I also installed the provided teather on the camera bracket and on the D-ring of the helmet instead of the provided teather mount. So far, I've got a few miles on my set up. Only time will tell how durable this mount will be.